Decal says: IMPORTANT UNLESS THESE INSTRUCTIONS ARE FOLLOWED, POWER TAKE-OFF SHAFT OR UNIVERSAL JOINT BREAKAGE MAY RESULT. 1-DRAWBAR MUST BE LOCKED IN LINE WITH POWER TAKE-OFF SHAFT. 2-ARRANGE FRONT BEARING SUPPORT SO THAT POWER LINE WILL OPERATE IN AS STRAIGHT A LINE AS POSSIBLE. 3-AVOID MAKING SHARP TURNS WHILE POWER TAKE-OFF IS OPERATING. 4-MAKE CERTAIN UNIVERSAL JOINTS ARE CORRECTLY SYNCHRONIZED. 5-ENGAGE CLUTCH SLOWLY BUT FIRMLY TO REDUCE HIGH STARTING LOAD. 6-IF POWER TAKE-OFF HAS GEAR SHIFTER, THE SHIFTER ROD MUST BE IN 540 POSITION BEFORE 540 SHAFT CAN BE INSTALLED WITHOUT DAMAGE. 7-CAPACITY OF 540 RPM PTO IS LIMITED TO 60 HORSEPOWER IMPLEMENTS. (SEE OPERATORS MANUAL)
